B&L TIFLEX GP – High Strength Structural Grout

B&L TIFLEX GP – High Strength Structural Grout

Product Description

TIFLEX-GP is a multipurpose non-shrink Class A cementitious grout complying with requirements of SAA MP20 part 3.

TIFLEX-GP is based on Portland cement, graded aggregate and chemical additives which impart controlled expansion whilst in the plastic state. The gaseous expansion system compensates for shrinkage and settlement in the plastic state. TIFLEX-GP is supplied as a ready to use dry powder requiring only the addition of a controlled amount of clean water to produce a free flowing non-shrink grout a gap thickness of 10mm to 120mm in a single application.

Areas of Use

• Caulking of joints and pipes.
• Precast and pre-stressed panels
• Grouting of column bases & base in-filling
• All general purpose grouting
• Filling core holes, rod holes and defects in concrete
• Fill in grout for hollow block walls
• Joints between precast panels and other joints
• Tilt slab panels

Features

• Gaseous expansion system compensates for shrinkage and settlement whilst in the plastic state.
• Economical, low in place cost. Can be dry packed, rammed, trowelled, poured and pumped.
•  Excellent flow characteristics when used in fluid consistency. Fills intricate cavities.
• Ready to use, pre-mixed, and requires only the addition of water.
• No metallic iron content to cause staining.
• Complete void filling resulting from gaseous expansion in plastic state.
• Lower water/cement ratio reduces drying shrinkage and increases durability and reduces permeability.

Technical Data Sheet